RockvilleRockville RCS180-6 180 Watt 6 Zone 70V Commercial/Restaurant Amplifier/Bluetooth
Rockville RCS180-6 180 Watt 6 zone 70V commercial/restaurant amplifier/Bluetooth
Rockville rcs180-6350 watt commercial/restaurant amplifier 19" Rack mountable (removable rack brackets) digital hybrid amplifier/receiver. Capable of 70 volt, 100 Volt, 8ohm, and 4 ohm. 70/100 volt RMS power: 184 watts. 4-16 ohm binding post speaker output.
6-Zones of speaker outputs - each zone has a separate volume control. 70 and 100 volt binding post outputs for single zone playback of all 180 watts. Built in Bluetooth Audio streaming. Fm radio tuner. Usb input to play audio stored on a thumb drive (32GB max).
(2) sets RCA aux inputs. (3) mic inputs. Rca line output. 100V speaker red positive speaker output terminal. 70V speaker red positive speaker output terminal. 8 ohm red positive speaker output terminal. Shared negative speaker output terminal
Power requirements: 120V/ 50-60Hz. A weighted signal to noise (@ 1W) -68.1Dba. A weighted signal to noise (referenced to full 4 ohm power) -89.2Dba. Frequency response: 49Hz to 14.9 kHz. Frequency response VS thd+m (worst case across normal bandwidth 1W @ 8 ohms: 0.89%. weight: 22.7lbs. Dimensions: 19" x 16" x 4" inches
Rockville RPA9 3000 Watt peak 2 channel professional/DJ rack mount amplifier. 2U rack space
Bridged and stereo output switch makes this perfect for (2) subwoofer, (2) speakers, or (4) speakers
Built in Crossover switch allows make this perfect for speakers, monitors, or subwoofers
Channel a & B clipping LED indicators. Channel a & B separate level controls
Power, Signal, overload, clipping, and protection LED indicators on front of amp
Heavy duty rack mount ears with handles. Built-in dual high velocity quiet cooling fans
Maximum headroom for 4-ohm and 8-Ohm speakers. Level controls for precise setting and matching of sensitivity
Computer controlled ice protection circuitry against speaker short circuit, Thermal over load, DC over load. User serviceable fuse (5A, 250V)
Frequency response: 20Hz to 20kHz <+/- 0.5dB. Distortion: <0.03%. input impedance: 20K ohm balanced and 10K ohm unbalanced
Signal to noise ratio: > 102dB. Power Requirements: 120V/ 50-60Hz. Weight: 17.19 lbs. Dimensions: 18.97" X 13.97" X 3.54"
GeminiGemini XGA Series XGA-4000 Professional Quality PA System DJ Equipment Power Amplifier with 4000 Watt Instant Peak Power
CLEAN, DEPENDABLE POWER: With a 4000 Watt Instant Peak High Power Output Without Clipping, The XGA-4000 Also Has A Frequency Response Of 10Hz-50kHz at 1.5dB, Total Harmonic Distortion of Less Than 0.1%, and Input Sensitivity and Impedance of 0.77v
BUILT FOR RELIABLE PERFORMANCE: The Amplifier has Front-to-Rear Airflow, Cooling Fan For Thermal Stability, 3 Speakon Outputs for Channels A/B/Bridge, 5-way Binding Banana Plug Channel Outputs, DC Output, Short Circuit Protection, and A Ground Lift Switch
DESIGNED WITH COMPREHENSIVE USE IN MIND: The XGA-4000 has a Variety of Features such as XLR and 1/4" Jack Balance, Stereo and Mono Bridge, Comprehensive Front Panel Indicators (Including Signal, Clip, Protect, and Bridge), and A Bridge Control Switch
PERFECTLY SIZED FOR ANY DJ SET-UP: The XGA-4000 Power Amplifier Unit Measures 19"L x 13.8"W x 3.5"H To Perfectly Fit With Any Set-Up Of DJ Equipment In A Variety Of Performance Spaces
TRUST GEMINI, AN INDUSTRY LEADER: Since 1974, We've Provided Innovative Products For DJs, Musicians, Sound Contractors and Professional Installers Around The Globe. This Is What Drives Us As An Industry Leader Is DJ and Audio Equipment
RockvilleRockville PPA20 Preamp Professional 1U Rack Mount Pre-Amplifier w/Crossover+EQ
Low cut crossover control allows you to cut off certain frequencies which comes in handy when using turntables, subs, and other gear. This function will allow you to play your music louder, with lower distortion and make your speakers last longer. Treble / Bass control. Loudness compensation circuit which at low-to-medium volume boosts the bass and treble response. Tape Monitor . Ground lift switch.
Unit dimensions: 18.89" x 6.49" x 1.73" inches. Unit weight: 4.43 lbs. Shipping dimensions: 20.47" x 8.46" x 4.33" inches. Shipping weight: 5.73 lbs. 110/220 switchable power supply (fuse: 0.2A)
Inputs Sensitivity/Impedance. Mic: 1mV / 3 Kohms. Phono: 3mV / 47 Kohms. Tape, Tuner, CD, Aux: 150mV / 22 Kohms. Output/Impedance. Tape Rec: 150mV / 3 Kohms. Pre Output: max. 11V / 1 Kohms. Total Harmonic Distortation. Mic: less than 0.02%. Phono: less than 0.04%. Tape, Tuner, CD, Aux: less than 0.01%. Signal To Noise Ration. Mic: more than 70 dB. Phono: more than 90 dB. Tape, Tuner, CD, Aux: more than 100 dB.
Frequency Response: 5Hz . 30kHz +0, -3 dB. Bass: 12dB at 100Hz. Midrange: 9dB at 1 Hz. Treble: 12dB at 10kHz. Loudness: 9/0/+9dB at 100/1k/10kHz. Mute: 20dB. Power: 120V or 230V, 50/60Hz. Power Consumption: 15W.
CrownCrown XLi1500 Two-channel, 450W at 4Ω Power Amplifier
User selectable input sensitivity - 0.775V and 1.4V
Electronically balanced RCA & XLR inputs; Binding post and speak on outputs
Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
Input: balanced XLR (x2), unbalanced RCA (x2); output: speak on (x2), Binding post (x2 pair)
Power: 450W at 4Ω, 330W at 8Ω
Ac input voltage: 220V, 50/60Hz
RockvilleRockville BluTube 70W Tube Amplifier/Home Theater Stereo Receiver with Bluetooth
Rockville BluTube Bluetooth tube 70 watt amplifier/home theater stereo receiver
Rockville BluTube audiophile grade tube amplifier with Bluetooth. 25 watts x 2 RMS @ 8 ohm. 35 Watts x 2 RMS @ 4 ohm. Tube Amps do not hard-clip even at high volumes and are extremely efficient. Due to this the amp sounds more like double the rated power!.
Built in Bluetooth with 33 foot range. Built-in preamplifier. (2) sets of RCA inputs to connect to any audio device like a TV, laptop, or MP3 player, etc.
Headphone output. Vu meter. Adjustable bass and treble (2 band equalizer). USB input for music files from USB thumb drive. Usb can charge your phone or other USB device. Rear speaker terminals: banana Plug/ binding post outputs for 2 speakers.
Frequency response (3dB): 25hz-20khz. Input impedance: 47Ko. Input sensitivity: 300mV. Output Impendence: 4-8ohm. Total harmonic distortion): =0.02%. Signal-to-Noise ratio(s/n): =86dB. Bluetooth: 2.1+Edr. Usb: Supports WAV/MP3/WMA/APE/FLAC. 110V/220V switchable. Unit weight: 6.6 lbs. Unit dimension: 10.6"X10.2"X5.1".
RockvilleRockville SS8P 400w 8" Slim Under-Seat Active Powered Car/Truck Subwoofer Sub
Studio-grade stereo FX processor with 16 presets including reverb, chorus, plate, delay, chorus, cathedral and various multi-effects. 8 high-quality mic preamps with switchable +48 V phantom power for condenser microphones.
3-Band EQ (high, mid, low) per channel. Pad Switch on each Mono Channel. Clip LEDs on each Mono Channel. Dual Stereo 7-band Graphic EQ allows for precise frequency correction of monitor and main outputs.
Selectable stereo (main L/R), double mono (main/monitor) or bridged mono amplifier operation mode. Monitor Level Knob with 5 LED Level Meter. Main Level Knob with 2 x 5 LED Level Meter.
Dual 1/4" Stereo and Dual RCA Aux Input with Independent Level Knob for External Signal Sources. Internal switch-mode power supply, noise-free audio, superior transient response and very low power consumption.
1/4" Foot-switch Input connector. Dual RCA REC Out. Dual Speak-ON jacks for Monitor Output. Dual Fan vent Cooling System. 110-120V power supply. Dimensions: 18" x 11.22" x 11.41". Weight: 30.9Lbs. NOTE: Refer the User Manual before use.
RockvilleRockville R7EQ 1/2 Din 7 Band Car Audio Equalizer EQ w/Front, Rear + Sub Output
Rockville R7EQ 1/2 Din 7 Band Car Audio Equalizer EQ w/ Front, Rear + Sub Output. Includes mounting brackets and screws for easy installation. 7 adjustable bands of equalization (50Hz,125Hz,315Hz,750Hz,2.2KHz,6KHz and 12KHz).
Each band is adjustable from -18dB to +18dB. Adjustable subwoofer frequency from 40Hz to 250Hz. Built in crossover. Subwoofer level controls and subwoofer frequency cutoff controls (40-250 Hz).
Built in 7 volt line driver. Blue LED lights on each rotary knob . Front, rear, and sub preamp outputs. Aux input with gain knob to adjust aux volume . Strong metal chassis with high quality rotary knobs for all controls.
Amazing quality with low distortion (Built with top quality components). Frequency response: 20Hz TO 20KHz +/- 1dB . S/N Ratio: 101 dB. Crossover Roll-Off: 12dB per octave.
Input impedance: 10K. Input sensitivity: 200mv per channel >7V. THD: 0.01%. Input: 12V. Output: 15V. Power requirement: 11-16V DC . Unit dimensions in inches: 7.04" x 4.72" 1.1".
Looking for a wire kit that has 100% true specifications? A wire kit that uses 100% copper 4-gauge cable? Then look no further than the Rockville True-Spec RWK4-CU 4 Gauge Amplifier Wiring Installation Kit.
The power and ground cables aptly named "Mega Power Cable" is a no compromise power cable. Rockville's engineering team over-built and designed the cables using thousands of strands of only true 100% oxygen-free, silver-tinned copper strands.
The use of a proprietary special twisting process reduces "surface skin impedance loss" so that Mega Power cables have zero signal and power loss, delivering full power from your battery system to your amplifier even at lengths of 20 feet!
The 100% copper stranded wire is extremely tolerant of the hostile conditions found under the hood in vehicles and compensates for vibration, heat expansion and flexibility.
Features:..Rockville RWK4CU 4 Gauge 2 Channel Complete Car Amplifier Installation Kit 100% Pure Copper RCA Cables.4 Gauge Power Amplifier Installation Kit.Designed specifically for car audio systems over 1000 watts RMS to 2000 Watts.
This package includes everything you'll need to get your amplifier system powered-up correctly and at peak efficiency. All items included in this kit are top of the line.
Made from silver-tinned 100% virgin copper for a pure uninterrupted transfer of power and signal.The solid brass gold plated Mini ANL Fuse Holder offers ideal protection for high powered systems.Strand Count: 1862.BC-5W2 Compliant.
This flexible and well-shielded wire is crucial for getting through all of the nooks and passageways within the confines of a vehicle interior.
The increased current flow and higher amperage carrying capacity will increase your amplifiers efficiency and keep your amplifier running cooler. The SuperFlex outer insulating jacket jacket makes installation and cable routing simple and easy.